Ceramic coating is permanent or semi-permanent in nature. It depends on the coating type that is applied to the car exterior. It protects your Vehicle against external paint damage. It is a liquid nanoscopic paint treatment that cures to form a hard layer over your Vehicle’s paint. 

The curing time for many coatings out there is different. Some of these coatings dry as fast as 30 minutes.

 Some administer 30 seconds to wipe off after application. Some bring one minute, others two to three minutes. However, some of the products provide five minutes or longer. 

Factors affecting curing time

Curing times may vary depending on the products you use and the environment you’re in. Heat, humidity, temperature, wind, etc., can all impact a coating’s flash time. Contrary to the common myth, leaving a surface coat longer on the car surface will not make it last longer. Neither can it work better or look different from others. Allowing a coating to sit on the surface for longer periods allows you to do larger sections before wiping the coating off. 

You can do a significantly larger section within five minutes before returning and wiping it off. As you drive your ceramic-coated VehicleVehicle, dust on the ceramic coating while curing makes it harder to drive. The golden rule is to give your ceramic coating a proper time after application.

We suggest waiting to wash the car within a week of applying the ceramic coating. Gain basic knowledge about the product you use, its properties and curing time. Once you apply the products on your car’s surface, it begins to harden and cure.

The ceramic coating requires seven to eight days to affix and stabilize the car surface. You may want to wash your car soon after the initial application, especially if it’s been raining or your car is contaminated by dust. 

Water doesn’t harm ceramic coating, but soap and other washing products can cause harm. Avoid using soap, chemicals or other wash products during the first seven days of applying the ceramic coating. It would help if you used ceramic coating for a complete cure. 

We suggest not washing the car out of direct sunlight until the paint is cool. Wash the wheels by using a wheel cleaner and wheel brushes. Rinse with a pressure washer. You must spray your car with pre-wash snow foam. Give it some time to work. It will allow the foam to break down all the dirt, dust, mud, and bugs from the paint. 

Use clean water to rinse the snow foam away. A pressure washer is ideal, but you can also use a garden hose. 

Always wash your car with high-quality ceramic soap, then apply a microfiber wash mitt. 

Use the 2-bucket car wash method to avoid scratches on the paint. Rinse the car with clean water; dry the Vehicle Vehicle by using a drying towel.

Xpel ceramic coating cure time is 24 hours. Once the part is coated, let it sit for about five minutes, then get the buffing towel. The towel should be used to buff off residue once a ceramic coating is applied to your Vehicle.

Park your car for 24 hours in direct sunlight to speed up the curing time. It will help early hardening the coating. On the first day of ceramic coating, it remains soft. In this period, it can easily be weakened. Usually, ceramic coating hardens after 48 hours of application; it will harden. It requires three for a complete cure. Curing time also depends on the outside temperature where your park your car and humidity. 

If your car is exposed to any kind of contaminant like bird droppings, tree sap, water, etc. is exposed, you must get rid of these elements immediately. Keep your car away from rain, direct sunlight, water sprinklers and chemicals during cue time.

Keep the car surface dry

You must keep the car surface dry. Gently dry the car surface if water does get on your car within the first 24 hours. Drying the car immediately after rain or contact with the car prevents water spots from developing. Water spots may develop if your car comes in contact with rain or water dropping after ceramic coating.

 After applying the ceramic coating, do not wash your car within seven days of application; keep the Vehicle Vehicle Away from Sprinklers.

Avoid parking under the trees

Try to Avoid Parking Under or Near Trees. It may create spots on the car’s surface.

Follow Manufacturer Recommended Aftercare Instructions.

Do NOT Use Spray Wax or Paint Sealants on Top of the Coating.

Could you keep it clean?

Keeping your ceramic coating last longer is the best way to keep it clean. Now that the initial curing period is over, you can use your car as usual. 

Proper maintenance

Although ceramic coating provides self-cleaning properties, you require proper maintenance to keep your car in proper form. 

Use prescribed products only

Use prescribed products in proper quantities and frequency. Using larger or fewer quantities of the prescribed products may yield the worst results. For example, if you use fewer cleaning products, you may not get the proper result and contaminate your car. But if you use car washing products in larger quantities, your ceramic coating may get damaged.

Three-step ceramic coating process

Three step process for maintaining ceramic coating is the easiest way 

Wash-

Maintain-

Rejuvenate. 

Using the right products, rinsing off contaminants, and drying it will help you maintain the layer for many years. You cannot protect your car from tiny particles with regular use. 

The ceramic coating helps maintain the original paint in pristine condition. It is also a time-saving method. The ceramic coating fuses to the car’s surface. It does not easily wear off from daily use. It is a long-term solution for protecting the exterior of your car. Ceramic coating creates a seamless barrier on top of your car’s paint, making it almost impossible for dirt to adhere to the surface. 

Wax is one of the best ways to keep your car scratch-free and clean. Cleaning your car requires a lot of time and effort. 

Depreciating ceramic coating with quite less maintenance may take more than five years. Ceramic coating costs more than wax treatment. In the long run, the ceramic coating doesn’t require regular change, so in the long run, it is cost-saving.

Conclusion 

Everyone wants his car in proper form. Maintaining your car maintains its value and helps you when you sell it. Ceramic coating is also helpful in maintaining your car paint. If you want to maintain and keep your car properly, check out our price and  contact us now! Get the ultimate ceramic coat finishing.